Page 1 of 1
Tables Question
Posted: Sun Jan 02, 2022 7:21 pm
by standay
Hi Sergey,
Here's a question not related to line numbers!
I use code in my main rve style to color the para background. Works fine and looks like what I want. However, when I pasted some tables in, the para bgnd is drawing in them and I don't want it in there (see screenshot below). How can I suppress the para bgnd color from drawing into my tables? I've tried everything I can think of and the only way I have gotten rid of the bgnds in the tables is to turn it off for everything!
Line 5 is a regular para and is fine. Lines 7 and 10 are the tables and I don't want the blue para bgnd bar to be drawn in those. If I decide to implement tables at all, it will be to add images like you see in the screenshot. So if the answer is to remove the image from the table that will be an issue.
Thanks Sergey
Stan
- Image47.png (95.5 KiB) Viewed 9256 times
Re: Tables Question
Posted: Sun Jan 02, 2022 8:46 pm
by Sergey Tkachenko
But if you draw paragraph backgrounds yourself, you can just check if a paragraph contains a table, and do not draw background in this case (?)
Re: Tables Question
Posted: Sun Jan 02, 2022 9:45 pm
by standay
Sergey Tkachenko wrote: ↑Sun Jan 02, 2022 8:46 pm
But if you draw paragraph backgrounds yourself, you can just check if a paragraph contains a table, and do not draw background in this case (?)
Tried that first thing. No go. If I select a line above the table(s), it highlights. Here's the code. Right now I have several attempts commented out but you can get an idea of what I was doing...part of it is the tables have the same itemno's as the rve. I think it's trying to highlight the same item no but I can't seem to get it stopped...
Code: Select all
if not EditorActiveLine1.Checked then exit;
if ActiveRVE <> rve then exit;
//if rve.GetItemStyle( rve.CurItemNo ) = rvsTable then exit;
//if rve.GetItemStyle( Sender.ItemNo ) = rvsTable then exit;
//if rve.GetCurrentItemEx(TRVTableItemInfo, rv, item) then exit;
if not rve.Modified and (rve.GetTextLen = 0) and
( not FileExists( FileNameFromDate(CalendarView1.Date) + '.rvf' )) then exit;
i := Sender.ItemNo;
j := rve.CurItemNo;
RVAlign := rvvaBaseline;
if (rve.GetItemStyle(j) = rvsPicture) then
rve.GetPictureInfo(j, s, gr, RVAlign, RVTag );
if (rve.GetItemStyle(j) = rvsBreak) or
( RVAlign = rvvaLeft ) or
( RVAlign = rvvaRight ) then exit;
if TCustomRVFormattedData(Sender.RVData) = rve.RVData then
j := rve.CurItemNo;
repeat
DoLineHL := i=j;
if DoLineHL then
break;
dec(i);
//was IsFromNewLine but wasn't always working that way so I changed it to
//IsParaStart 9/9/2021. SRD
until TCustomRVFormattedData(Sender.RVData).IsParaStart(i+1);
if DoLineHL then begin
//ACanvas.Brush.Style := bsSolid;
//ACanvas.Brush.Color := $CCCCFF;
//ACanvas.FillRect(ARect);
r := ARect;
if ShowLinenumberIndicators1.Checked and ExtendEditorSel1.Checked then
r.Left := 0;
if rve.GetItemTextW(j) <> '' then
r.Bottom := r.Bottom + 2;
//if OfficeTextSel1.Checked then r.Left := 0;
ColorBlend(ACanvas, r, SRDJournalThemes.EditorActiveLine , 225);
end;
Re: Tables Question
Posted: Sun Jan 02, 2022 11:02 pm
by standay
Hi Sergey,
FYI, I tried a plain table with no image, still does it, and in a simple test app and it's still doing it there.
Stan
Re: Tables Question
Posted: Mon Jan 03, 2022 9:08 am
by Sergey Tkachenko
Can you create a simple project reproducing this problem?
Re: Tables Question
Posted: Mon Jan 03, 2022 10:45 am
by standay
Hi Sergey,
I'll attach a simple test file and the project unit. I don't think I can do the whole thing as attachment size is limited here.
Let me know if this is sufficient.
Stan
Re: Tables Question
Posted: Mon Jan 03, 2022 10:56 am
by Sergey Tkachenko
Please attach DFM file
PS: you can attach ZIP files
Re: Tables Question
Posted: Mon Jan 03, 2022 11:13 am
by standay
Sergey Tkachenko wrote: ↑Mon Jan 03, 2022 10:56 am
Please attach DFM file
PS: you can attach ZIP files
OK, attached a zip. No DCUs or EXE in it but everything else its there.
Note that this was happening in version 19.5. I updated to version 20 this morning and still the same effect.
Stan
Re: Tables Question
Posted: Mon Jan 03, 2022 6:19 pm
by Sergey Tkachenko
Attached.
By default, the demo highlights the current paragraph, both in a table cells and not.
There are two checkboxes.
One turns off highlighting in table cells.
Another one turns off highlighting tables themselves.
Re: Tables Question
Posted: Mon Jan 03, 2022 8:08 pm
by standay
Hi Sergey,
Yes, that all worked. THANKS. The key was this:
Code: Select all
Edit := rve.TopLevelEditor;
if TCustomRVFormattedData(Sender.RVData) <> Edit.RVData then
exit;
I thought it was going to be something like that. And I actually tried things along those lines, but the closest I got was this:
Code: Select all
if rve = rve.InPlaceEditor then exit;
and...
Code: Select all
if rve = rve.TopLevelEditor then exit;
It never occurred to me to set up a separate var and then compare it the way you did. Sigh.
Well, thanks again.
Stan